01
GIMS for Ground Distributed Lightning & Interference: China Suppliers & Factory Solutions for MV and LV Applications
Function Features
Ground potential counterattack overvoltage suppression
Ground interference suppression
Grounding current monitoring
Grounding current FFT analysis
Grounding impedance monitoring
Ground impedance exceeding limit alarm
Ground potential monitoring
Ground potential exceeding limit alarm
GIMS continuously monitors the ground network in real-time and can share the monitored data with third-party platforms, providing strong data support for future fault analysis.
Technical Indicators
| Working power supply | 220VAC |
| Interference suppression frequency range | 75Hz ~ 100MHz |
| Depression ratio | 50% ~ 96% |
| Maximum suppression voltage | 25kV (Transient) |
| Maximum suppression current | 320kA (Transient) |
| Normal loss | ≤ 60W |
| Resistance measurement range | 0 ~ 200Ω |
| Protection time accuracy | 0.001s |
| Response time | < 25ns |
| Measurement accuracy | ± 2.5% |
| Protection grade | IP20 |
Detail Pictures
Frequently Asked Questions
Q
What is the primary function of the GIMS system?
The GIMS system suppresses ground potential counterattack overvoltage and ground interference while continuously monitoring grounding current, impedance, and ground potential with automated limit alarms.
Q
What is the interference suppression range and efficiency?
It operates across an interference suppression frequency range of 75Hz to 100MHz with a depression ratio performance between 50% and 96%.
Q
What are the maximum transient surge suppression capacities?
The system can suppress transient overvoltages up to 25kV and transient surge currents up to 320kA, responding in under 25ns.
Q
What are the system's resistance measurement limits and accuracy?
The resistance measurement range is 0 to 200Ω with a measurement accuracy of ±2.5% and a protection time accuracy of 0.001s.
Q
Can monitoring data be exported to third-party software?
Yes, GIMS continuously monitors the ground network in real-time and supports data sharing with third-party platforms for future fault and FFT analysis.
Q
What are the power requirements and environmental enclosure ratings?
It operates on a standard 220VAC power supply with normal power loss of ≤ 60W and comes with an IP20 protection grade enclosure.
