01
High-Frequency Voltage Monitoring Device RAVS - Reliable China Suppliers & Factory for Power Quality Solutions
Functional Features
01
Beidou/GPS timing
Can be connected to a separate external time synchronization device or shared with the original system clock.
02
Voltage flicker
If the difference between the maximum peak values of the two adjacent wave heads of the voltage waveform exceeds the set threshold, immediately start recording (-1~+30s).
03
Voltage sag
If the voltage of any phase is lower than the set threshold, immediately start recording (-1~+30s).
04
Voltage oscillation
Oscillation is difficult to prevent and poses serious harm. When the oscillation amplitude exceeds the set threshold, immediately start recording (-1~+30s).
05
Voltage deviation
The transient voltage waveform contains a DC component, and when the amplitude exceeds the set threshold, the recording is immediately initiated (-1~+30s).
06
Voltage surge
External surge, power transmission, protrusion, sudden load rejection, etc., exceeding the set threshold, immediately start recording (-1~+30s).
07
Voltage grounding
When a single-phase grounding fault occurs in the system, accurately identify the fault and its occurrence time, and immediately start recording (-1~+30s).
08
Voltage short circuit
When a phase to phase short circuit fault occurs in the system, accurately identify the fault and its occurrence time, and immediately start recording (-1~+30s).
09
Routine power quality monitoring
Voltage fluctuation, load current, power analysis, THD monitoring, imbalance monitoring, etc. No need to install other power quality monitors.
10
Main spec
Sampling frequency 100kHz; monitor 0-63 harmonics, inter harmonics, and higher harmonics; 4G memory, 64G solid-state drive; LCD high brightness TFT LCD touch screen; 10 inches; Resolution 800 × 600; 1 × RS-232/485, 1 × RS232, 4 × USB2.0, 1 × VGA, 1 × GigaLAN.
Products Advantage
⚡ Technical Level
- High sampling frequency: 20kHz (sampling time: 83ms → 50ms)
- More duration time recording: -1~+30s (panoramic recording)
- More duration time when power loss: 60s
- Accurate time synchronization function: Beidou or GPS
- Stronger analysis capabilities: Real time analysis of various voltage issues
- Solution Recommendation: Based on the analysis results of panoramic recording, recommend the most reasonable solution
🛠️ Process Level
- Change the touch screen to 10 inches
- Improve wiring methods: wiring terminals, wiring methods, etc
- High strength anti vibration structural design
- Artwork style full art design
•
ROFS, specially designed for low-voltage systems;
•
Longer recording time;
•
Real time monitoring of circuit breaker status;
•
Powerful data analysis and networking capabilities.
Frequently Asked Questions
What timing synchronization options are supported by the system? ▼
The system supports Beidou and GPS timing. It can be connected to a separate external time synchronization device or shared directly with the original system clock to ensure precise data logging.
How does the device record voltage anomalies like sags, surges, or flickers? ▼
When the system detects that anomalies (such as voltage sags, surges, flickers, oscillations, deviations, grounding, or short circuits) exceed the pre-set thresholds, it immediately initiates a panoramic recording capturing data from -1 second before the event up to +30 seconds after.
What are the main technical specifications of the display and interface? ▼
The system features a 10-inch high-brightness TFT LCD touch screen with an 800 × 600 resolution. For connectivity, it includes 1 × RS-232/485, 1 × RS232, 4 × USB2.0, 1 × VGA, and 1 × GigaLAN interfaces.
What advantages does the system offer during a power loss scenario? ▼
In the event of a power loss, the system provides an extended duration time of up to 60 seconds, ensuring critical event data is saved and recorded before complete shutdown.
Is this system suitable for low-voltage applications? ▼
Yes, the system features ROFS, which is specially designed for low-voltage systems. It provides longer recording times, real-time monitoring of circuit breaker status, and powerful data analysis and networking capabilities.