01
RAVS: Advanced China Factory Supplier for Real-Time High-Frequency Power Supply Voltage Monitoring Solutions
Functional Features
Beidou/GPS timing
01
Can be connected to a separate external time synchronization device or shared with the original system clock.
Voltage flicker
02
If the difference between the maximum peak values of the two adjacent wave heads of the voltage waveform exceeds the set threshold, immediately start recording (-1~+30s).
Voltage sag
03
If the voltage of any phase is lower than the set threshold, immediately start recording (-1~+30s).
Voltage oscillation
04
Oscillation is difficult to prevent and poses serious harm. When the oscillation amplitude exceeds the set threshold, immediately start recording (-1~+30s).
Voltage deviation
05
The transient voltage waveform contains a DC component, and when the amplitude exceeds the set threshold, the recording is immediately initiated (-1~+30s).
Voltage surge
06
External surge, power transmission, protrusion, sudden load rejection, etc., exceeding the set threshold, immediately start recording (-1~+30s).
Voltage grounding
07
When a single-phase grounding fault occurs in the system, accurately identify the fault and its occurrence time, and immediately start recording (-1~+30s).
Voltage short circuit
08
When a phase to phase short circuit fault occurs in the system, accurately identify the fault and its occurrence time, and immediately start recording (-1~+30s).
Routine power quality monitoring
09
Voltage fluctuation, load current, power analysis, THD monitoring, imbalance monitoring, etc. No need to install other power quality monitors.
Main spec
10
Sampling Frequency: 100kHz
Monitoring: 0-63 harmonics, inter harmonics, and higher harmonics
Memory & Storage: 4G memory, 64G solid-state drive
Display: LCD high brightness TFT LCD touch screen; 10 inches; Resolution 800 × 600
Interfaces: 1 × RS-232/485, 1 × RS232, 4 × USB2.0, 1 × VGA, 1 × GigaLAN
Products Advantage
Technical Level
High sampling frequency: 20kHz (sampling time: 83ms → 50ms)
More duration time recording: -1~+30s (panoramic recording)
More duration time when power loss: 60s
Accurate time synchronization function: Beidou or GPS
Stronger analysis capabilities: Real time analysis of various voltage issues
Solution Recommendation: Based on the analysis results of panoramic recording, recommend the most reasonable solution
Process Level
Change the touch screen to 10 inches
Improve wiring methods: wiring terminals, wiring methods, etc
High strength anti vibration structural design
Artwork style full art design
ROFS, specially designed for low-voltage systems;
Longer recording time;
Real time monitoring of circuit breaker status;
Powerful data analysis and networking capabilities.
Frequently Asked Questions (FAQ)
What are the time synchronization options supported by the system?
The system features Beidou/GPS timing. It can be connected to a separate external time synchronization device or shared with the original system clock to ensure high-accuracy time synchronization.
How does the device handle voltage anomalies like sags, surges, and flickers?
When the device detects voltage anomalies (such as sags, surges, flickers, oscillations, deviations, grounding, or short circuits) exceeding the set threshold, it immediately initiates recording with a recording duration of -1 to +30 seconds.
Does this system require additional power quality monitors for routine checks?
No, there is no need to install other power quality monitors. The device supports routine power quality monitoring, including voltage fluctuation, load current, power analysis, THD monitoring, and imbalance monitoring.
What are the core hardware and interface specifications?
The device is equipped with a 10-inch high-brightness TFT LCD touch screen (800 × 600 resolution), a 100kHz sampling frequency, 4G memory, 64G SSD storage, and multiple interfaces including 1 × RS-232/485, 1 × RS232, 4 × USB2.0, 1 × VGA, and 1 × GigaLAN.
What technical advantages does this system offer over standard options?
Key technical advantages include a high sampling frequency of 20kHz, extended panoramic recording (-1~+30s), 60 seconds of backup power during power loss, Beidou/GPS time synchronization, real-time voltage analysis, and automated solution recommendations based on panoramic recording.
Is the ROFS system suitable for low-voltage setups?
Yes, ROFS is specially designed for low-voltage systems. It features longer recording times, real-time monitoring of circuit breaker status, and powerful data analysis and networking capabilities.